Search results for "Maximum temperature"
showing 10 items of 11 documents
Quantification of relaxor behavior in (1 − x)Na0.5Bi0.5TiO3 – xCaTiO3 lead-free ceramics system
2019
Abstract This work examines the relaxor behavior of lead-free ceramic (1 − x)Na0.5Bi0.5TiO3–xCaTiO3 systems. A stable rhombohedral (R3c) phase is detected at room temperature for all compositions by XRD and Raman spectroscopy. Relaxor behavior was observed in the temperature range 300 K - 400 K for all materials. Ceramics exhibit normal ferroelectric properties at room temperature, and then they develop relaxor characteristics with increasing temperature showing the same dispersive properties. This work quantifies the relaxor phenomenon at low temperature. For instance, the maximum temperature of relaxor and the order of dispersion were determined at the strongest dispersion. Finally, the s…
Topographic descriptors and thermal inversions amid the plateaus and mountains of the Jura (France)
2018
Sixteen temperature measurement sites under forest cover are distributed across the plateaus and mountains of the Jura (France). They are composed of pairs of stations located, one at the bottom of a topographic trough, the other at least 50 m higher in altitude. Three descriptors (station elevation, altitudinal difference (amplitude) between the two stations of each site, and topographical context) are used to explain how the frequency, intensity, and duration of inversions are spatially structured. Depending on whether one considers: 1) tn (minimum temperature) or tx (maximum temperature), 2) frequency or intensity, the sign of the correlation values changes. This reflects the fact that n…
Relationship between exercise-induced muscle soreness, pain thresholds, and skin temperature in men and women.
2021
Abstract Infrared thermography (IRT) has gained popularity in sports medicine for determining whether changes in skin temperature relate to pain and muscle damage. Such a relationship would support IRT as a non-invasive method to monitor these physiological responses. However, the literature remains controversial. Here, we determine the relationship between exercise-induced muscle soreness (DOMS), pain, and skin temperature in men and women before and after exercise. Twenty-two physically active adults (10 men and 12 women) completed a squat exercise protocol to induce muscle damage. Skin temperature, DOMS, and pressure pain threshold (PPT) were assessed in the quadriceps pre, post-exercise…
Recent temporal and spatial temperature changes in Egypt
2005
In order to detect and to estimate trends of temperature change in Egypt, trend analyses applying the least-squares method and the non-parametric Mann–Kendall test for trends were carried out at six stations for the period 1941–2000 (60 years), and at nine stations for the period 1971–2000 (30 years). According to the trend computations for the period 1941–2000, variable temperature trends over time and space have been observed. Decreasing trends of the mean annual temperature were observed in northern Egypt and (weakly) increasing trends in southern Egypt. Seasonally, positive trends prevailed in summer compared with negative trends in winter. For the recent period, 1971–2000, positive tre…
Evaluation of in-farm versus weather station data for use as heat stress indicator in dairy sheep
2005
AbstractHeat stress is a limiting factor in dairy production in hot climates impairing growth, milk production and reproduction. The most widely investigated climatic factors related with heat stress are: air temperature and relative humidity. Previously dairy sheep studies of heat tolerance depended on measurements of physiological functions on individual animals such as rectal temperatures, respiration rates or volumes of air inhaled; unfortunately, such measurements are costly and not feasible on a large scale. This study aims to evaluate in-farm (IF) versus weather station (WS) data to be used as heat stress indicator in dairy sheep. Data were collected in three farms in November 2002 t…
Infrared thermography assisted control for apples microwave drying
2012
A microwave based system was developed for drying of apple slices while on-line controlling their temperatures. An infrared thermography assisted control system allowed to realize temperature control by detecting the instantaneous maximum temperature among the samples under test instead of a chosen slice. The effectiveness of the system at hand in realizing temperature control both in space and in time was proven for three temperatures: 55, 65 and 75 C. Temperature fluctuations became larger both with time increasing and with rising temperature levels thus causing a negative impact on dried fruit quality. In fact apples slices dried at 75 C by microwave showed L⁄ (lightness) and white index…
Laser irradiation of ZnO:Al/Ag/ZnO:Al multilayers for electrical isolation in thin film photovoltaics
2013
Laser irradiation of ZnO:Al/Ag/ZnO:Al transparent contacts is investigated for segmentation purposes. The quality of the irradiated areas has been experimentally evaluated by separation resistance measurements, and the results are complemented with a thermal model used for numerical simulations of the laser process. The presence of the Ag interlayer plays two key effects on the laser scribing process by increasing the maximum temperature reached in the structure and accelerating the cool down process. These evidences can promote the use of ultra-thin ZnO:Al/ Ag/ZnO:Al electrode in large-area products, such as for solar modules. © 2013 Crupi et al.; licensee Springer.
Experimental study of the pyrolysis of waste bitumen for oil production
2020
Abstract This work focuses on bitumen slow pyrolysis. Mass and energy yields of oil, solid and gas were obtained from pyrolysis experiments using a semi-batch reactor in a nitrogen atmosphere, under three non-isothermal conditions (maximum temperature: 450 °C, 500 °C and 550 °C). The effect of temperature on the product yields was discussed. The gas compositions were analysed using gas chromatography (GC) and the heating value of oil and solid residue was also measured. Using a thermo-gravimetric analyser, kinetic parameters were evaluated through Ozawa-Flynn-Wall (OFW) method. Results showed that oil yield is maximum at 500 °C (50%). Moreover, gas yield increased with increasing pyrolysis …
Time of emergence of Mediterranean summer maximum temperature.
2016
The time at which the signalof climate change emerges from the noise of natural climate variability is called “time of emergence”. This timeis analyzed here based on summertime mean maximum temperature in the Mediterranean basin for RCP8.5 andRCP4.5 scenarios. This time would be around 2040-50 (2060-70) in the eastern (western) basin. Differencesbetween the optimistic and pessimistic scenarios give a mean shift of around 15 years with the time ofemergence occurring earlier for RCP8.5 scenario.
Soda-AQ pulping of reed canary grass
2001
Abstract Delignification of reed canary grass (Phalaris arundinacea L.) was carried out by conventional soda-anthraquinone (AQ) pulping under varying conditions selected according to an orthogonal experimental design with four factors (cooking parameters) at three levels each L9 (34). The influence of these four parameters, i.e. effective alkali, EA (12, 15, and 18% on oven dried (o.d.) reed, as NaOH), maximum temperature (145, 155, and 165°C), time to maximum temperature (70, 90, and 110 min), and time at maximum temperature (0, 15, and 30 min) on the pulp properties (yield, kappa number, and viscosity) was studied. Results indicated that, with respect to delignification, EA was the most i…